|
Spencer Speedway Information Sheet |
|
RACE OF CHAMPIONS DART MODIFIED TOUR – EVENT #4
SPENCER SPEEDWAY – WILLIAMSON, NY 13126 – FRIDAY, JUNE 18TH
Location: 3020 State Route 104, Williamson, NY 14589
Speedway Phone: Race Office: (315) 589-3018
Speedway Website: www.spencerspeedway.org
Pit Fees: $35 for NASCAR and R.o.C members, $45 without license.
Pit Gates: 4:30 p.m.
Grandstand Gates: 5:30 p.m.
Grandstand Prices: Adults: $25 – Kids ages 6-12: $6
Practice: 6:00 p.m. Race Time: 7:30 p.m.
Membership Info: Any filed applications will have membership cards available upon signing in at the speedway.
ROC cars will pit in the infield,with haulers taken out the turn 4 gate when emptied. We will start practice this night at 5:30 sharp, so please try to arrive early enough to get in the infield.
Schedule of events are as follows;
Practice 5:30-7:00 2 sessions each division
7:05 Drivers meeting
7:30 sharp 2 or 3 Sunoco Modified heats 8 Laps
3 ROC Modified heats 10 Laps
4 Cyl. Feature 20 Laps
Street Stock Feature 25 Laps
6 Cyl. Feature 25 Laps
Sunoco Modified Feature 35 Laps
ROC Modified Feature 75 Laps
Modified Feature: 75 green flag laps.
Special Notes… All race tires will be marked and tested for softener. Any tire found with softener will result in immediate disqualification.
All carburetors will be inspected prior to warm-ups. Any illegal carburetor will be impounded for the day and team found of infraction will lose qualifying draw position and must start last. Must then find legal carburetor to compete.
Only one new tire will be permitted for the feature after heat race qualifying. Teams must start feature on heat race tires.
Pit road will be set up for pit stops in the infield as needed.
Driver must have a raceceiver or be able to monitor 454.000
All teams must register their radio frequencies in order to compete. Inaccurate frequency listings will result in disqualification.
All drivers must have some type of neck restraint system
(may use foam neck collar or Hans type device).
Lowbak Mufflers are mandatory. Weight for steel headed motor minimum is 2575 lbs. Aluminum head motor weight minimum is 2600 lbs. Anything over 368 cubic inches must add 50 lbs. Maximum cubic inches is 376. Maximum left side weight is 55% at all times.
For Tire Information please call: French’s Auto Parts at (607) 774-4500.
The tour tire truck will not be on site so plan on contacting French’s for
delivery options prior to the event.
|
|
